As a big brother of crushing equipment, China jaw crusher has always served as the major driving force among the crusher products as it has such advantages as simple structure, stable performance, easy and convenient examination and repair and big crushing ratio. The types of crushing equipment are increasingly expanding, but the position of jaw crusher can never be replaced.

Jaw crusher machine owns higher crushing materials rate in crushing equipments, which has still become an new idea. As we all think traditionally, jaw crusher is a kind of coarse crushing equipment, and it becomes the common sense when we refers to stone jaw crusher. Stone broken in the mining are requires processing machine to form the business, and this kind of machine is jaw crusher.Jaw crusher is the use of two jaw surface material extrusion and bending effect. Jaw breaker is very good to use a machine, is also a kind of materials of the largest broken machine.

Jaw breaker has simple structure and reliable working process. As the coarse and basic crushing equipment in various production line, just like sand making production line, stone production line, cement production line and so on. Jaw crushing macine is widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry, and many other departments, crushing various material compressive strength less than 320 million mpa.

Good performance jaw crusher can reach to 800 tons per hour, the speed of material crushing of large jaw crusher. Jaw crusher feed particle size is about 1800 mm. In jaw crusher usually used cases, jaw crusher with double bracket and the bracket of the two.Double bracket jaw crusher moving jaw at work only for simple circular arc swing, so they are called simple swing jaw crusher; Single bracket jaw crusher in arc swing at the same time also make up and down, of course, also known as complex swing jaw crusher

Welcome to visit the professional jaw crusher supplier–Henan Hongxing Mining Machinery Co., Ltd.: sales@hxjq.com.

stone jaw crusher: http://www.sino-ball-mill.com/goods/jaw_crusher.html

Rotary kiln or circumgyrate kiln belongs to building material equipment in the classification class. But rotary calciner kiln in the equipment of large itself is also a kind of resource consumption, and also in the process of production of produce certain pollution, in order to prevent in the rotary kiln production produce secondary pollution, in the whole manufacturing system, the rotary kiln is equipped with dust removal system, coal equipment is equipped with three air duct or four duct burner. This kiln can be divided into dry and wet process rotary kiln.

The application of clinker rotary kiln in industry is very broad, not just in one area. In the field in the metal manufacturing equipment of all kinds of metal smelting, the metal contains iron, copper, nickel, zinc, etc. Such as industrial enterprise is bound to be used when iron-making rotary calcination kiln, this time mainly for blast furnace iron-making process. In addition, there are some chemical production process is the use of the product will be the reduction of some iron ore in high efficiency.

Circumgyrate kiln has realized efficiently the management of waste resources disposal, it is actually a good news for all the people who pay more attention to green industry. With the accumulation of time, the waste generated in the production of viable also in unceasing increase, a lot of rubbish is beyond the capability of the natural evolution, beyond the part of people”s living environment has brought a lot of pollution, processing production and living garbage has become a common human responsibility and mission. After processing, many industrial wastes in the production, by calcining cement rotary kiln and technology, the production of various types of cement. Rotary kiln in processing waste into the use of the role is particularly important.

If you are interested in the rotary kiln, you can contact or visit Hongxing Machinery: sales@hxjq.com.

horizontal kiln: http://www.ball-mill-china.com/news/kiln_dryer.html

The China impact crusher, also called impact breaker or impact stone crusher, is new type highly-efficient crushing equipment with the features of small size, simple structure, high crushing ratio (as much as 40), low energy consumption, strong production ability, even particle size, etc. As a very promising machine, the impact crusher has been applied in some ore dressing factories owing to the appearance of highly-abrasive material. The impact crusher is often used to crush the hard rock, therefore, it is also called hard rock impact crusher.

Impactor breaker has multiple crushing chambers, the stone ultimately achieves the fineness requirements after coarse crushing and fine crushing, and eventually becomes the raw material that can be used through continuous processing.

Here Henan Hongxing Mining Machinery Co., Ltd. introduced the impact crusher used as hard rock crushing machine:

1. for the first question: high frequency of replacing wearing parts, you can use higher wear resistance accessories such as high manganese steel to solve for high manganese steel has the character of brittle and hard, hard and tough which reducing the frequency of replacement.

2. for the material after crushing having high dust content, there are several methods to solve this problem:

1) put some small amount of water onto the materials before crushing for there are little dust when crusher acting on wet materials;

2) impact crusher is sealed in the crushing work hours, seal the place of dust-producing with sealing device will reduce dust and pollution to the environment;

3) equipped the impact crusher with dust removal device to eliminate dust;

4) make screening on the materials before they are crushed.

As one of professional crusher manufacturers in China, Henan Hongxing Mining Machinery Co., Ltd. produces different crushing equipment for different materials: aggregate crusher, gravel crusher for sale, concrete crusher, shale crusher, etc. If you need any breaker machine, welcome to visit Hongxing Machinery: sales@hxjq.com.

Raymond mill is widely used to grind potassium feldspar, talc, barite, calcite, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, thermal insulation materials and other non-flammable and non-explosive materials with mohs hardness not more than 9.3 and humidity below 6% in mineral, chemical, building and other industries.

Raymond grinder adopts vertical structure, small footprint, strong performance sets, its own production system, independent from the material block to finished powder. Refined powder fineness of uniform, through screening rate can reach 99 percent, and this can not be achieved by other milling equipment.

Machine gear sealed gear box and pulley transmission smooth, reliable operation. Important parts are quality just wear parts are high-performance wear-resistant materials, the wear resistance of the machine, very reliable operation. The electrical system uses centralized control, milling workshop basically allows for unattended operation, and is reflected in the maintenance.

Installed when the need to pay attention to control the height, as well as the horizontal plane. Connecting bolts between the equipment and infrastructure is the best electricity providers rubber shock pad. Pipeline aspects must be strictly in accordance with the design drawings, not random changes and heightening. Pipe joints need to be sealed and tightening after not leak. Electrical equipment to be accurate and reliable. Various parts of the installation is complete, the test machine.

About Raymond grinding mill installation and commissioning, before it comes, safekeeping, coated with anti-rust grease, but also to avoid the sun and rain, preventing the body rust influent. But also to establish a maintenance system. The plant should have enough height and width, installed after the completion of pouring cement foundation, there must be a 15-day maintenance period. Factory equipment to use for longer than six months, the central axis of the host system, transmission device, roller device, analysis of oil pool cleaning inspection, add enough oil to various parts cleaning check.

Welcome to visit Hongxing Machinery: sales@hxjq.com.

powder grinding equipment: http://www.crushing-mill.com/powder-making-machine.html

Hammer mill crusher is an important crushing machine which can be sued for crushing crisp materials such as stone, ore, coal, shale and gypsum. Hammer crusher machine makes use of the kinetic energy produced by the hammer rotating with high speed to hit and break the ores. Here Henan Hongxing Mining Machinery Co., Ltd. reminds you of the wear parts of hammer mill crusher:

1. In the process of work,it is due to the impact of the material and friction,making fine crusher spare parts such as hammer, liner wear and failure. Among of them, the hammer head is the main wearing parts, its consumption is great, it need to reserve a large number of spare parts. But this will not only take up much money, and affect the normal production of the enterprise. So finely machine for replacement of new board hammer, hammer head must be weight. According to the weight of symmetric installation, Symmetry position plate hammer need to weight requirements, otherwise when the equipment operate, the rotor imbalance caused by abnormal vibration.

2. We should clean finely machine and internal product material regularly, because of the product material, hammering machine plate hammer will sharply reduce the friction and wear and service life of the severely. We will regularly check fine crusher plate hammer and counterattack plate, plate, bar, etc of parts wear degree. For abnormal and excessive wear of the components, we need to do early detection, early solution. The service life of the heavy hammer crusher is directly related to the use of user cost and maintenance cost.

3. We should choose reaction type stone crusher or shock type fine crusher, wearing parts with the hardness of the material life is very different. The correct use and scientific maintenance of the equipment is always in good condition, it is an effective way to prolong the service life of the hammer head.If we are improper use and maintenance, not only it is easy to cause equipment failure, such as vibration, noise, heat, wear and tear, and it is bound to cause the service life of hammer head lower.

Welcome to visit Hongxing Machinery: sales@hxjq.com.

single stage hammer crusher: http://www.made-crusher.com/productslist/66.html

The flotation cell, also called flotation separaytor, or flotation machine, is various in types in the mining industry, and different flotation separation methods should be chosen according to the specific separation need. Flotation machine can be used to separate nonferrous metal, ferrous metal, heavy metal, nonmetallic mine, chemical material and recycling minerals. Each chute can inhale gas, sink magma, separate. No assisting equipments are required, and flotation machine must be installed horizontally. Ore flotation equipment is easy to change the flow chart. The cycling way of magma is very reasonable.

Flotation machine can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward. Structural of flotation machine: This machine is mainly composed of bearing slurry tank, agitator, inflatable device, mineralized foam discharging devices, motors and other components.

The flotation separator impellers are driven through V- belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

Check the bolts before starting the flotation machine and to use hand instead of impellers to prevent the sediment from adding the burden of electromotor. To adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The flotation machine impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

Welcome to visit Hongxing Machinery: sales@hxjq.com.

cell flotation: http://www.crushing-mill.com/flotation-cell/

Jaw crusher is a kind of common stone processing equipment, It belongs to the old-timers in mining machinery, and it has experienced the test of time, perfect in performance, quality of excellent. But even so, in the process of the jaw crusher, the production also often work intensity. Featured with a series of characteristics and functions, the jaw breaker is widely used in metallurgy, chemical industry, building materials, electricity, traffic and many other fields. Generally speaking, jaw crushers fall into two kinds: singletoggle jaw crusher and double-toggle jaw crusher. Meanwhile, Henan Hongxing also manufactures primary jaw crusher and aggregate jaw crusher.

Operating mode is not compliance, we will deal with this or that kind of problems. We will timely and reasonable adaptation measures, solve the problem, we try to minimize downtime caused negative influence, and the jaw crusher machine is a kind of mechanical accident.

If jaw crusher eccentric shaft bushing set loose or fall off, this will cause the frame inside the bearing seat of both sides no clearance, eccentric shaft was firmly stuck. This is a kind of the card machine, so how to solve it ? This phenomenon should be reinstalled eccentric shaft bushing set bolt, if it damages, we should be replaced even. If the discharging mouth plugging material, you should be clear all material crushing cavity, it can continue to boot and in about three hours to complete, but it takes too much time. In the crusher to install a bell mouth and alarm flashing lights, and relay in electric cabinet directly connected. If the alarm lights, at this time, we stop feeding, it can prevent jaw crusher plugging material problems.

If you have any question about the jaw crushing machine, you can consult the professional jaw crusher supplier–Henan Hongxing Mining Machienry Co., Ltd.: sales@hxjq.com.

rock pulverizer: http://www.chinaquarry.com/news_show/n113.html

Sand Making Machine is a kind of sand maker,which is widely used for fine crushing and coarse grinding in mining, rocks, fireproof materials, glass raw material and metallurgy residues. Sand maker is mainly used for manufacturing artificial sand and stone materials ,VSI impact crusher is an important sand making plant. Due to the faster and faster social development, natural sand cannot satisfy the production requirement any longer, and more and more sand needs to be produced with sand making machine. The advantages of sand making equipmet:

1. Multi-purpose machine, flexible application: unique crushing structure together with wide ranges of crushing chambers can make stone hits stone and stone hits iron simultaneously. If we have different purposes, we just need to adjust a few parts; we could use it for artificial sand, sand reshaping etc.

2. Fine shape of final product- good cubic shape, fineness modulus can be adjusted, especially suitable for artificial sand making and stone reshaping. It is proved that the reshaping achievement increases by 30% compared to other traditional equipments.

3. Simple installation and easy operation: it is light in weight and has diverse means to install. It is very easy to install, maintain, use and repair. When the concrete purpose is set, it just needs tiny adjustments to make full use of it.

5. Hydraulic drive system is convenient to maintain, hydraulic cover opening device makes it more convenient and easier to replace the wearing parts in crushing cavity and decreases the downtime, thus saves time and energy.

6. International quality guarantee: it adopts Germany advanced technology, advanced riveting technology, abrasive blasting, rust removal and spray paint in automobile making, which greatly improves inner and exterior quality.

7. Large processing capacity and high capacity of ideal output: 50-500 t/h, output increases by 30% compared with the traditional equipment using same power, and VSI sand maker works more stably.

8. Low consumption of wearing parts- excellent designed impact angle in crushing chamber reduces the frication between wearing parts and materials, consequently operation cost can be reduced by 30%.

9. Environmental protection: the automatic air circulatory system makes lower noise, less dust. Besides, VSI vertical shaft impact crusher can be installed with kinds of dust-cleaning devices.

10. Automatic monitoring equipment is safe and reliable: Vibrating and alarming device will warn and turn off the crusher to protect it.

Welcome to visit Hongxing Machinery: sales@hxjq.com.

sand making machinery: http://www.hxjq-ballmill.com/pro/sand_maker.html

Stone production line, also known ston crushine line, stone crusher plant and sand making production line. This production line has high automation degree, low operation cost, high crushing rate, large output, less pollution and easy maintenance; mechanism sand produced by the line conforms to the national building standards, with uniform granularity, good grain shape and reasonable gradation.

Indeed, if 50 tons of sandstone production line production need jaw crusher and impact crusher, then pay two crusher machine and form a complete set of wear parts wear and tear, and the connection between the main feedingbelt conveyor, in addition, the motor power of the two crushers also must be higher than a, plus the cost of belt conveyor and electrical consumption, these add up to a lot of spending. And if the same requirement of sand production line, if using a single period of fine crusher (material: limestone) or single period of jaw crusher (material: granite) can meet the requirements, not only reduce the cost of the machine, half of the wear parts consumption, as well as a belt machine and electric consumption, and can satisfy the requirement of sand discharge line and production capacity, can save a lot of investment.

crushing plant” />

More attention will be focus here when buying the crushing equipment, motor power and equipment costs and whether free for civil engineering and installation are the detailed information. Sand stone field customers mostly emphasize on sand production line project, but don”t have a good research on sand production line linked to stone crushing machine. Focus on motor and power equipment price is just take temporary solution not effect a permanent cure, want to reduce the cost ofsand making line, reduce the amount of sand production line configuration of equipment must begin, the less the number of host equipment and belt conveyor and so on, can reduce the production cost of the finished stone.

Welcome to visit Hongxing Machinery: sales@hxjq.com.

crushing plant：http://www.sino-dryer.com/mining-equipment/p33.html

As a matter of fact, the Rotary drum dryer is the device that is used to heat and dry the materials. Rotary drying machine is generally applicable to granular materials and it can be also used for the drying of some part of sticky pasty materials or the materials with high water content. Rotary dryers are commonly used to dry sand, slag, slime and so on. What is more, the drying machine is one of the drying apparatus typically used in the cement plants, namely, cement rotating dryer. And Do You Care for Drying Speed of Rotary Dryer Machine?

CHINA Dryer in the process of drying materials, according to the speed of change can be divided into four stages: stage of preheating, constant speed stage, the stage of slow down and material reaches a certain balance under the condition of the water content of the stage. Preheat phase of China dryer: first is the problem of drying is very low, when material come into contact with hot air, hot air and water temperature, the temperature of the material first to water gasification temperature, this period of time is called preheat phase.This stage is characterized by material from tipping point to a certain value, time is very short.

The constant speed stage of rotary drying: with heat passed on, increasing water and material on the surface of the problem, but because the surface of the water vapor pressure of involvement into the air gasification diffusion, will make the material on the surface of the problem.Internal moisture evaporation, water on the surface of the material will continue as the surface flow, the surface still keep humidity, drying speed will not change.This phase is characterized by water gasification material, material of the inner surface of the water to the diffusion speed is very fast, keep wet material surface, drying speed is constant and has a maximum value.

In addition, they are professional roller dryer, flour dryer and China cone crusher manufactures and ball grinder suppliers, and stone jaw crusher for sale, etc,. If you have any other question or have an interest on our product ,you can write to us: sales@hxjq.com

limestone dryer: http://www.china-cementmill.com/pp/dryer.html